My Sukima-Onna comes mounted with “Sticky-Max” by Lemox that can be re-used to adhere her to a dark place in your display or you can rub it away and use your favorite adhesive. She comes with half-a-head full of tangled hair and her very own black light spotlight. The spotlight is a 3mm UV bulb mounted to solid-core wire–so you can position it and it will hold it, and a single CR2032 battery case and battery. The battery case has an on/off switch.
Specifications:
Sukima-Onna head is approx 1″ tall x 1/2″ thick by 1/2″ wide. She has approx 5″ of hair and you can trim it with scissors if you need it shorter. She is only 1/2 of a face. She comes on a display card with an INCLUDED black light spotlight(!). She is perfect for a dollhouse but would be at home tucked in a bookcase. Put a magnet on the side of her head and let her lurk in the crack on the side of the fridge…
The black light/UV Spotlight: is a 3mm UV LED diode soldered and taped to approx 5″ of solid core wire. The wire is then soldered and taped to the flexible wire that attaches to the single (1) CR2032 battery case. This allows you to position the light and the solid-core wire will help hold that position. The case has an on/off switch. Battery is included!
IMPORTANT: This spot light does NOT have a resister soldered into the wiring! Without the resister, the spotlight cannot be safely connected into a 12-volt DC dollhouse electrical system–the bulb will literally explode! (Ask me how I know…) It is best left on the 3-volt included battery pack. If you need to wire a UV spotlight directly into your electrical system please look at my black light Spotlights in another listing as those do have the resister soldered into the wiring, or contact Cherie directly if you need something custom made.
Reviews
There are no reviews yet.